AC-0007 Air Compressor 4-Port Regulator with 1/4 in. and 1/8 in. Ports
In stock
In stock
The AC-0007 regulator is an air compressor regulator with 4 ports.
This regulator features a 1/4 in. inlet and outlet port for airflow, and two 1/8 in. ports on the sides. The 1/8 in. ports are used to capture tank pressure and line pressure.
This 4-port regulator was used on many portable air compressors from Sears Craftsman and DeVilbiss.
Air Flow Direction for the AC-0007
The AC-0007 has an arrow located on the bottom of the regulator. This arrow indicates the airflow direction, with the arrow pointing towards the regulator's outlet. When installing the AC-0007, the arrow should point away from your air compressor.
What's the Difference Between the Old Style vs. New Style of the AC-0007?
The main difference is that the new style AC-0007 has a square body style, while the old style AC-0007 has a round body style.
When an AC-0007 regulator is ordered, we will send out the new style square-body design. We show photos of the old style AC-0007 regulator for reference, and to help identify older air compressor regulators.
Compatibility Information
The AC-0007 regulator is known to fit the following air compressor models:
Compatible Craftsman Models:
- 919-16500
- 919-16518
- 919-16633
- 919-16714
- 919-16716
- 919-72512
- 919-72633
- 919-72712
- 919-72713
- 919-72726
Compatible DeVilbiss Models:
- ACBF420
- ACBL520
- AFL520
- DF412
- DF430
- DF5020
- DF5030
- EXF5020
- EXFAC2080
- EXFAC28S1
- EXFBC6025
- EXFC5020
- EXFC5520
- EXFTVC630
- F18
- F312
- F3520
- F412
- F420
- F5020
- F5030
- FAC28
- FB412
- FB4512
- FB5020
- FB5020-WK
- FB5020-WK-C
- FB5530
- FIFC420
- FTV530
- FTV630
- GFTVC6030
- HF412-WK
- HF5030-WK
- HFAC28
- HFB412
- HFB4512
- HFB4512-WK
- HFBC4512
- HFBC4512-WK
- IR100E8AD
- IR25E20AD
- IR4E20AD
- IR500TVE30
- IR5E20AD
- IRC500TVE30
- IRF18
- IRF312
- IRF3520
- IRF412
- IRF420
- IRF5020
- IRF5030
- IRFB412
- IRFB4512
- IRFB5020
- IRFB5020-WK
- IRFB5021-WK
- IRFBC4512
- IRFC18
- IRFC420
- IRFC5020
- IRFCTV630
- IRFTV630
- IRSFAC28
- L420
- L520
- L530
- PAF3530
- PAF430
- PAFB412
- PAFB4512
- PAFB5020
- PAFB5025
- PAFBC4512
- PAFBC5025
- PAFC3520
- PAFC430
- PAFC5020
- PAFC5030
- PAFCTV530
- PAFCTV630
- PAFTV530
- PAFTV630
- PALC520
- PRF5020
- PRF5020-WK
- PRF5530
- PRFC5020
- PRFC5020-WK
- PRFC5530
- RA4E20AD
- RA500TVE30
- RA5E20AD
- RAC100E8AD
- RAC500TVE30
- RAF3520
- RAF3530
- RAF412
- RAF420
- RAF430
- RAF5020
- RAF5030
- RAFB412
- RAFB4512
- RAFB5020
- RAFBC412
- RAFBC4512
- RAFC18
- RAFC5020
- RAFCTV630
- RAFTV630
- SFFC420
Compatible Porter Cable Models:
- CF2020
- CF2800
- GFC5020
Service Note:
In some cases, the new style AC-0007 Regulator may be too tall to allow the regulator to be installed without hitting the air compressor tank.
If this is the case with your installation you will need to simply remove the “Black Adjusting Knob” from the regulator with the following procedure.
1) Remove the Mounting Rind from the Regulator turning the mounting ring counterclockwise until it is removed from the threads of Black the regulator knob.
2) Turn the Black adjusting knob counterclockwise to expose the flat spots on each side of the regulator mounting threads.
3) Place the Silver regulator metal body into a vise and secure metal regulator body being careful not to damage any threads of the metal regulator body.
4) With a 1/18 Smooth wrench locate the flats spots on the regulator mounting thread area of the Black plastic portion of the regulator and turn this portion of the plastic regulator counterclockwise until the Black plastic adjustment body is removed from the Silver metal body.
Note:
No loose parts will be exposed during this process so there is not a risk of anything falling out during this procedure.
5) After the Silver regulator body is in the desired position reassemble the Black plastic position on the regulator back into the Silver body and reassemble all removed components.